TeeJet 854 Sprayer Control - Manual (Page 14)

www.teejet.com
9
854 Sprayer Control
Auto.Power.Down
The 854 console is designed to automatically power
down after 10 minutes of inactivity from the sensor
or operator. To adjust the length of time:
• Use the PLUS or MINUS keys to change
the value of the power down time.
• Press the PROGRAM key to accept the
value and advance to the next program step.
NOTE: If the Power Down Time is set to “0”, the
Auto Power Down feature will be disabled.
Figure 3-15: Auto Power Down
Pur 10
Off
TEEJET.COMMUNICATION.
SYSTEM.(TCS).CONFIGURATION
NOTE: If the TeeJet Communication System (TCS)
package was not purchased for this console,
the next 2 programming steps DO NOT
pertain to your spraying operation. IF THIS
IS THE CASE, THESE VALUES SHOULD
BE LEFT AT THE DEFAULT SETTINGS.
Job.Operating..System
• Job No (Default) - the console uses application
parameters entered by the operator only
• Job Only - the console uses application
parameters entered from the TeeJet
Communication System only
• Job Both - the console accepts application
parameters for both the operator and the TeeJet
Communication System
To establish the Job Operating System settings:
• Use the PLUS or MINUS keys to change
the value.
• Press the PROGRAM key to accept the
value and advance to the next program step.
Figure 3-16: Job Operating System
JOb