SilentKnight SK-5208 Conventional FACP 10-30 Zone - Manual (Page 83)

151204
A-1
Appendix A
Compatible Devices
This section of the manual lists devices (smoke detectors and notification appliances) that are compatible with
the SK-5208. Contact Silent Knight if you have a question about whether a device not listed here is compatible.
A.1 Notification Appliances
For proper operation, you must use polarized devices with a Model 7628 4.7k ohm EOL resistor on each loop.
All supervised notification appliances used with the control panel must be polarized. The table below lists notifi-
cation appliances compatible with the FACP. Appliances which can be synchronized indicate the type of sync
available in the columns marked Audio and/or Visual.
Note: Not all devices can use the Sync feature, be sure to check table below to ensure the device you have chosen
will work with this feature. Synchronization is UL listed as a single circuit operation.
Table A-1: Compatible Notification Appliances
Manufacturer Model Audio Visual Type
AMSECO
SH24W-153075 x x Horn/Strobe
SAD24-153075 x Strobe
SAD24-75110 x Strobe
SL24W-75110 x Strobe
SL24C-3075110 x Strobe
SLB24-75 x Strobe
RSD24-153075 x Strobe
RSD24-75110 x Strobe
SH24W-75110 x x Horn/Strobe
SH24W-3075110 x x Horn/Strobe
SHB24-75 x x Horn/Strobe
SCM24W-153075 x Chimes/Strobe
SCM24W-75110 x Chimes/Strobe
SCM24C-3075110 x Chimes/Strobe
SCM24C-177 x Chimes/Strobe
H24W x Horn
H24R x Horn