SilentKnight SK-5208 Conventional FACP 10-30 Zone User Manual
Page 64
Model SK-5208 Installation Manual
151204
4-23
Misc Reporting
*3/1 Alarm
0 - 9
* Event code for 3/1
and 4/2 reporting
formats.
0
Alarms for Fire, Waterflow, Undefined, Heat,
Cold, and Water events.
*3/1 Alarm Rst
2
Alarms restores for Fire, Waterflow, Undefined,
Heat, Cold, and Water events.
*3/1 Supervisory
6
Sprinkler supervisories.
*3/1 Restore
7
Restore reports for Troubles, Supervisories, and
unbypasses. The only exceptions are the restores
listed as alarm restores.
*3/1 Trouble
8
All system and zone troubles, and zone/NAC
bypasses, and NACs troubles.
*3/1 Test
9
All test events.
5280 (1 - 8) #
Outputs
5280 #
Not Used
X
Zones 1_10
Zones 11_20
Zones 21_30
System
5824 Expander
5824 ID
0 - 7
0
Sets the serial bus address for the 5824. Use a 0 to
disable this feature.
Event Log
Yes
X
If yes then all events are sent to the printer.
No
Prn Off Line
0 - 30 Seconds
20
Selects the number of seconds the printer can be
off line before a trouble is generated.
Serial Prn
Yes
X
If yes is selected then data is sent to the serial port.
No
If no is selected then data is sent to the parallel
port.
Baud Rate
9600
X
Select the Baud rate at which your printer requires
to communicate properly. Consult installation
manual for the printer you are using.
19.2K
75
110
134.5
150
300
600
1200
2000
2400
4800
1800
Data Bits
8
X
Select the number of data bits that your printer
requires for proper communication. Consult
installation manual for your printer.
5
6
7
Stop Bits
1
X
Select the number of stop bits that your printer
requires for proper communication. Consult
installation manual for your printer.
2
0
Table 4-4: Programming Options
Programming
Option
Menu Item
Choices
Default
Comments