SilentKnight SK-5208 Conventional FACP 10-30 Zone - Manual (Page 43)

Programming 151204
4-2
4.1.1 Special Characters
Special characters are characters used while dialing such as pause, *, #, or 2nd dial tone. Table 4-1 list the
Special characters and what they mean.
4.1.2 Enabling Extended Programming List
While programming there are several programming options that have multiple components that can be
programmed within that menu item, such as Zones, NAC Cadence, User Codes, Accounts, etc. However when
you scroll through these options only the first one may be displayed (see Figure 4-1). In order to view and
program subsequent items the Silence button must be pressed. This enables you to move through the other
Zones, NAC Cadence, etc.
Example:
If the Zone 1 Options is displayed (see Figure 4-1) and you want to program zone 2 options, press the SILENCE
button.
Figure 4-1 Extended Programming List Access Example
The display will add brackets around the zone number (see Figure 4-1). To move to the next zone number press
the right arrow to go forward through the zone numbers or the left arrow to go backward through the zone
numbers. Press the Silence button again to remove the bracket and lock the menu on this Zone number, NAC
number, or Relay, etc.
This Feature works for the following programming options: Zone Options, NAC Cadence, User Codes,
Accounts, Line Options, and SK-5280 Options.
Table 4-1: Special Characters
To Enter: Press LCD Display
Pause A
* B
# C
2nd Dial Tone D
1
2
3
4
Initial Display Display After Silence Button Pressed
Right Arrow Pressed then
Display Moves to Next Zone Number