PRG Mbox Studio Manual 3.8 - Manual (Page 190)

182 MBOX ® STUDIO USER MANUAL
*
These elements require additional input files in order to obtain the desired result. Users will need to provide their own additional
files.
** The modifier channels for the Damping effects apply damping in 1/30 sec. increments. Therefore, a value of 30 will add 1 sec-
ond to any change of that parameter. The damping is divided equally between the start and end of the movement curve. Effect
parameters can be adjusted during a move to affect only one side of the curve.
Notes for Effects:
1 These effects require that the second effect channel on the corresponding layer be set to 255. At that point, Mod 2A controls X-
position and Mod 2B controls Y-position. The default value for both additional controls is 127.
2
Modes for Effect 110:
0 Luma, 1 Luma Invert, 2 Red, 3 Red Inv, 4 Green, 5 Green Inv, 6 Blue, 7 Blue Inv, 8 Alpha, 9 Alpha Inv
3
Effects 201-217 are not available for use on the Master fixture.
215 Texture Flip
inverts drawing axes (X,Y,Z) when
applying a texture to an object
Control 1:
0 - 31 = flip X
32 - 63 = no flip
64 - 95 = flip X, Y
96 - 127 = flip Y
128 - 159 = flip X, Z
160 - 191 = flip Z
192 - 223 = flip X, Y, Z
224 - 255 = flip Y, Z
Control 2: N/A
217 Spin
controls spin speed and direction
about X/Y/Z axes
Control 1 - Z Axis :
0 = stop + return to 0°
1 - 126 = fast to slow forwards
127 = stop
128 - 255 = slow to fast backwards
Control 2 - X Axis :
0 = stop + return to 0°
1 - 126 = fast to slow forwards
127 = stop
128 - 255 = slow to fast backwards
Control 3 - Y Axis :
0 = stop + return to 0°
1 - 126 = fast to slow forwards
127 = stop
128 - 255 = slow to fast backwards
Control 4 - N/A
Effects (Continued)
Refer to notes at end of Effects table.
ID Effect Description Control 1 Control 2