Keri Systems TAP100 - Manual (Page 8)

TAP 100 Application Software Manual
Page 8 Revision 3.3
Current time is XX : XX : XX . XX p/a
This lists the time on the host PC system in Hours : Minutes : Seconds . Hundredths of a
Second and then P.M. or A.M. If you are satisfied the system time is correct, type:
If you need to change the system time, enter the hours, minutes, and P.M. or A.M.
indicator to which you want to set the host PC system clock.
For example: To set the host PC system clock to 9:15 A.M., type:
Enter new time: 9:15 a
The host PC system’s clock will be set to the new time.
NOTE: All time commands are formatted to a 24-hour clock. For example: 6:15
P.M. becomes 18:15 hours.
To verify/change the host PC system’s date:
At the C:\> DOS prompt, type:
C:\> date
The system will respond with:
Current date is Day-of-Week MM-DD-YYYY
This lists the date on the host PC system as the Day-of-the-Week followed by the Month,
Day, and Year. If you are satisfied the system date is correct, type:
If you need to change the system date, enter the Month, Day, and Year to which you
want to set the host PC system date.
For example: To set the host PC system date to April 15, 1995, type:
Enter new date 04-15-95
The host PC system’s calendar will be set to the new date.