Keri Systems TAP100 User Manual

Page 41

TAP100 Application Software Manual

Revision 3.3

Page 41

PC. For this example, we want to report input events, so use your pointing device and select
Send to PC.

The fifth field to define is the Output Lines field. This field defines which of the 2 available outputs
at the reader is being assigned to this link. The factory default for both outputs is set to Not Used.
The handling of the output line can be defined in one of three ways: Deactivate, Activate, or
Momentary. Deactivating the output sets the output relay to its inactive state. Activating the output
sets the output relay to its active state. Setting the output to Momentary will cause the output to
momentarily toggle its state. For this example, we want to toggle the output, so use your pointing
device and select Momentary.

After all of these changes have been made, the I/O Assignments for Link 0 prompt box should
appear as follows.

If all of the assignment information is correct, use your pointing device and select OK. The
TAP100 software will return to the I/O Assignments prompt box and display the following
information.

The assignments for Link 1 must now be made to complete the ‘OR’ assignment. To summarize
the previous 5 steps and make the Link 1 assignment, you must use your pointing device and
select MODIFY, set your Input Reader to Reader 2, set your first Input Line to Normal, set your
Output Reader to Reader 2, activate Send to PC, and set your first Output Line to Momentary.
The I/O Assignments for Link 1 prompt box will appear as follows.

I/O ASSIGNMENTS

INPUT

INPUTS

OUTPUT

OUTPUTS

LINK

READER

1 2

-----Available -----

• • •

Reader 1 (01)

Reader 2 (02)

MODIFY

SEND

CLEAR

QUIT

I/O ASSIGNMENTS FOR LINK 0

Input Reader:

Sup I/O: No

Polarity: Norm. Closed

Input Lines:

1
2
3
4

Output Reader:
Output Lines:

1
2

1 Reader 1

( ) Active ( • ) Normal ( ) Tamper ( ) None
( ) Active ( ) Normal ( ) Tamper ( ) None
( ) Active ( ) Normal ( ) Tamper ( ) None
( ) Active ( ) Normal ( ) Tamper ( ) None

[ X ] Send to PC

2 Reader 2

( ) Not Used ( ) Deactivate ( ) Activate ( ) Momentary
( ) Not Used ( ) Deactivate ( ) Activate ( ) Momentary

QUIT

DISABLE