Keri Systems TAP100 - Manual (Page 78)

TAP 100 Application Software Manual
Page 78 Revision 3.3
Responding Nodes Table
The responding nodes table is provided to help you determine which nodes are active and
responding to the network. Execute the Verifying Network Operation command found on page 23
and compare the responding nodes value returned to the entries in this table.
Hexadecimal Digit Hexadecimal Value Binary Value Active Readers
xxxx xxxX if X is a . . . its value is . . . indicating the active readers are . . .
0 0000 4, 3, 2, and 1 are inactive
1 0001 1
2 0010 2
3 0011 2 and 1
4 0100 3
5 0101 3 and 1
6 0110 3 and 2
7 0111 3, 2, and 1
8 1000 4
9 1001 4 and 1
A 1010 4 and 2
B 1011 4, 2, and 1
C 1100 4 and 3
D 1101 4, 3, and 1
E 1110 4, 3, and 2
F 1111 4, 3, 2, and 1
xxxx xxXx if X is a . . . its value is . . . indicating the active readers are . . .
0 0000 8, 7, 6, and 5 are inactive
1 0001 5
2 0010 6
3 0011 6 and 5
4 0100 7
5 0101 7 and 5
6 0110 7 and 6
7 0111 7, 6, and 5
8 1000 8
9 1001 8 and 5
A 1010 8 and 6
B 1011 8, 6, and 5
C 1100 8 and 7
D 1101 8, 7, and 5
E 1110 8, 7, and 6
F 1111 8, 7, 6, and 5