Interlogix Monitor XL Hardware Guide - Manual (Page 63)

22-0375 rev1.1 Monitor ISM/xL™ Hardware Guide 59
13) Now, power the modem down (i.e., remove power
from the modem).
14) The modem is now ready to be used with a
system panel. You can unplug the modem and
shut down the HyperTerminal program when
ready. To shut down HyperTerminal, open the File
menu, and select Exit .
(If prompted to save your changes, select Yes.)
Tip: If you need to set up another modem in the future, you
can open your saved session instead of setting up a new one.