Main, Projector user commands, Format – Canon SX 50 User Manual
Page 74: Parameter, Response, Description, Example
Projector User Commands
- 68 -
Revision History / Date
Changes
Revised by
Approved by
MAIN
Front panel operation emulation
Format
MAIN□
Parameter
Errors supported by model
Parameter
Meaning
SX50 SX6, SX60,
X600
SX7,
X700
SX7
Mark II
Remarks
POWER O
O
O
O
POWER
POWER_OFF O O O O
POWER button pressed
MENU MENU O
O
O
O
AUTO SET
AUTOSET
x
O
O
O
COMPUTER1 COMPUTER1 O
x
x x
COMPUTER2 COMPUTER2 O
x
x x
VIDEO VIDEO O
x
x
x
INPUT INPUT
x
O
O
O
AUTOPC AUTOPC O
O O
O
KEYSTONE KEYSTONE O O O O
UP O
O
O
O
UP
UP+REP
x
O
O
O
Button press start
DOWN O
O
O
O
DOWN
DOWN+REP
x
O
O
O
Button press start
LEFT O
O
O
O
LEFT
LEFT+REP
x
O
O
O
Button press start
RIGHT O
O
O
O
RIGHT
RIGHT+REP
x
O
O
O
Button press start
OK OK O
O
O
O
FOCUS FOCUS
x
O
O
O
ZOOM x
O
O
O
ZOOM
*-REP
x
O
O
O
Button press end
* Use the application to adjust the time between pressing of keys.
Response
"i:OK" is returned when the button press request has been acknowledged successfully.
(It does not indicate if the operation for the pressed button was executed properly.)
Description
This emulates the pressing of the front panel buttons for controlling the projector.
(1) It can only be used during Local mode.
Note 1
With the emulation of the front panel operations, the functions of the buttons corresponding to the parameters cannot
necessarily be executed. Emulation simply consists in emulating the pressing of the buttons.
Note 2
A parameter with '+REP' signifies "button press start." (This is the same as the status in which the front panel button
is held down.)
Be absolutely sure to send the '*-REP' parameter, and end the button pressing last of all.
The button pressing is ended in the cases below as well.
1) When a panel or remote control button has been operated
2) When an 'RC' or 'MAIN' command has been received
3) When operation has transferred to the remote mode
Example
Setting
> MAIN FOCUS
< i:OK
Control