Canon SX 50 - Manual (Page 134)

Projector User Commands
- 128 -
Revision History / Date Changes Revised by Approved by
GET ERR
Error information inquiry
Format
GET□ERR
?△ERR
Response
g:ERR=
Errors supported by model
Error ID Meaning
SX50
SX6, SX60,
X600
SX7, X700 SX7 Mark II
NO_ERROR No error ○ ○ ○ ○
ABNORMAL_TEMPERATUR Temperature error ○ ○ ○ ○
FAULTY_LAMP Lamp error ○ ○ ○ ○
FAULTY_LAMP_COVER Lamp cover error ○ ○ ○ ○
FAULTY_COOLING_FAN Cooling fan error ○ ○ ○ ○
FAULTY_POWER_SUPPLY Power supply error ○ ○ ○ ○
FAULTY_AK AK error - ○ ○ ○
FAULTY_ASC ASC error - ○ ○ ○
FAULTY_AF AF error - ○ ○ ○
FAULTY_POWER_ZOOM Zoom error - ○ ○ ○
FAULTY_POWER_FOCUS Focus error - ○ ○ ○
For details on other responses, refer to the "Error List".
Description
This command is used to inquire about the current error information.
(1) This inquiry can be made in any status provided that AC power is supplied to the projector.
For the "SX50," the remote mode must be established.
(2) Information when the warning LED of the projector is flashing can be obtained.
"NO_ERROR" is returned when the warning LED is not lighted.
Example
> GET ERR or ? ERR
< g:ERR=FAULTY_LAMP
* Commands are indicated by ">", and responses are indicated by "<".
Commands supported
This defines the environments that support the command (power supply state, input signal state).
SX50
01.00**
SX6
01.01**
SX60
01.01**
X600
01.01**
SX7
01.01**
X700
01.01**
SX7 Mark II
01.02**
O O O O O O O
Environment
This defines the environments that support the command (power supply state, input signal state).
Power Input Mode
Model
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP Video S-Video D-Video SCART None Remote Local
Remarks
SX50 O O O O O O O O O - - O O x
SX6, SX60,
X600
O O O O O O O O O O O O O O
SX7, X700 O O O O O O O O O O O O O O
SX7 Mark II O O O O O O O O O O O O O O
* If a state is not supported, "INVALID_MODE" is returned with the Err response.
* When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Reference