KEYENCE DL-CL1 - Manual (Page 44)

3-2 Device Maps
3-16 - CC-Link Compatible Network Unit DL-CL1 User’s Manual (SK-1000) -
Comm
u
nic
a
ti
ng
w
it
h th
e
SK-1
000 Se
ri
es
3
Number [n] denotes the first relay number assigned to the DL-CL1.
*1 Refer to "Entering an External Input into a Sensor Amplifier" (page 3-18).
*2 Refer to "Reading/Writing Settings or Status of a Sensor Amplifier" (page 3-23).
Refer to "Issuing a Motion Command to a Sensor Amplifier" (page 3-22).
Mo
ni
to
r mo
de
1
F
u
ll mo
d
e
1
F
u
ll mo
d
e
2
RWr[n] + 06
External input-3
response
*1
Stores the external input-3
response of the sensor amplifier.
The response is output by
assigning sensor amplifiers (ID 01
to ID 08) to bits 0 - 07.
0: Input OFF
1: Input ON
RWr[n] + 07
External input-4
response
*1
Stores the external input-4
response of the sensor amplifier.
The response is output by
assigning sensor amplifiers (ID 01
to ID 08) to bits 0 - 07.
0: Input OFF
1: Input ON
RWr[n] + 08 (Not used) - - -
RWr[n] + 09
Judgment value
"invalid"
*4
If the judgment values for sensor
amplifiers (ID 01 to ID 08) are
invalid (-----), they are output by
assigning them to bits 0 - 7.
0: Normal value
1: Invalid
RWr[n] + 0A
Judgment value
"over"
*4
If the judgment values for sensor
amplifiers (ID 01 to ID 08) are
"over," they are output by
assigning them to bits 0 - 7.
0: Normal value
1: Over
RWr[n] + 0B
Judgment value
"under"
*4
If the judgment values for sensor
amplifiers (ID 01 to ID 08) are
"under,"they are output by
assigning them to bits 0 - 7.
0: Normal value
1: Under
RWr[n] + 0C
to 0D Judgment value
ID 01
*4
Used when reading judgment
value (P.V. value).
Outputs the judgment value of the
sensor amplifier (ID 01).
INT32 (LITTLE)
RWr[n] +0E
to 0F Judgment value
ID 02
*4
Used when reading judgment
value (P.V. value).
Outputs the judgment value of the
sensor amplifier (ID 02).
INT32 (LITTLE)
RWr[n] +10
to 11 Judgment value
ID 03
*4
Used when reading judgment
value (P.V. value).
Outputs the judgment value of the
sensor amplifier (ID 03).
INT32 (LITTLE)
RWr[n] +12
to 13 Judgment value
ID 04
*4
Used when reading judgment
value (P.V. value).
Outputs the judgment value of the
sensor amplifier (ID 04).
INT32 (LITTLE)
RWr[n] + 14
to 15 Judgment value
ID 05
*4
Used when reading judgment
value (P.V. value).
Outputs the judgment value of the
sensor amplifier (ID 05).
INT32 (LITTLE)
RWr[n] + 16
to 17 Judgment value
ID 06
*4
Used when reading judgment
value (P.V. value).
Outputs the judgment value of the
sensor amplifier (ID 06).
INT32 (LITTLE)
RWr[n] + 18
to 19 Judgment value
ID 07
*4
Used when reading judgment
value (P.V. value).
Outputs the judgment value of the
sensor amplifier (ID 07).
INT32 (LITTLE)
RWr[n] + 1A
to 1B Judgment value
ID 08
*4
Used when reading judgment
value (P.V. value).
Outputs the judgment value of the
sensor amplifier (ID 08).
INT32 (LITTLE)
RWr[n] + 1C
to 29
(Not used) - - -
Operating
mode
Device no.
(HEX)
Name
Communication
method
Description Reading range