Aviom AllFrame - Manual (Page 44)

32 P
ro
64 u
ser
i
nTerfaCe
ALL FRAME
™
Multi-Modular I/O System
By activating a group of channels on each of the four input devices, a total of sixteen inputs are used (indicated
by reverse text). All of these inputs are available on the network at every Pro64 output device. The operator in
Location E can use the sixteen inputs from Locations A, B, C, and D simultaneously.
The order in which the Pro64 devices are connected is irrelevant.
Location A Inputs
Channel
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Location B Inputs
Channel
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Location C Inputs
Channel
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Location D Inputs
Channel
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Location E Outputs
Channel
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
This makeup of this network can be reconfigured simply by activating a different set of channels. The input
devices can come from any combination Pro64 devices as well as any mix of signals types such as line-level, mic-
level, digital, or those derived from Yamaha format console cards.
Slots and Sample Rate
The current network-wide sample rate will determine the number of A-Net Slots that are available.
Sample Rate A-Net Slots
44.1kHz 64
48kHz 64
88.2kHz 32
96kHz 32
Even though the network sample rate may change the available number of A-Net Slots, the capacity of a hardware
device does not change. That is, a 16-channel input device in a 96kHz network can still have all of its channels
activated; all of its physical inputs can operate at 96kHz.