Aviom AllFrame - Manual (Page 12)

WARNING
When using AllFrame Modular I/O System devices with
approved Power Over A-Net (PoA) power supplies, DO NOT
hot-plug the Cat-5 connection between the Power Over
A-Net (PoA) device and the F6 Modular I/O Frame unit.
Serious damage to the products connected to the power
supply can occur.
Always power down the Power Over A-Net (PoA) power
supply, the F6, and other Pro64 devices connected directly
to the power supply before changing any powered A-Net
connections.
Do not disconnect the factory-configured Cat-5e cable that runs between the power •
supply and the A-Net I/O jacks.
Do not disassemble the or alter the POA80 assembly in any way. •
Do not block the ventilation ports on the power supply. •
Do not connect the POA80 port marked “DC Power Plus A-Net” to any device other •
than an F6 Modular I/O Frame’s A-Net Port B.