Aviom AllFrame - Manual (Page 22)

10 a
ssembling The
a
ll
f
rame
s
YsTem
ALL FRAME
™
Multi-Modular I/O System
A
ssembliNg the
A
ll
F
rAme
s
ystem
The AllFrame Multi-Modular I/O System is user-configurable, and is designed to be easy to modify and reconfigure
as your needs change.
Prior to installing the unit in an electrical wall box, equipment rack, or other enclosure, the user must connect
the mounting brackets, install I/O cards, configure the power options for the F6 Modular I/O Frame, and provide
Pro64 A-Net via Cat-5/Cat-6 or fiber.
Once the F6 is assembled and connected to the network, you can apply power to the device and start to manage
the network using Pro64 Network Manager.
Installing I/O Cards
The F6 Modular I/O Frame has six I/O card slots that can be configured by the user to contain any combination of
analog and/or digital I/O cards. The I/O cards can be installed in any order and into any of the six available slots
(labeled A through F) in the F6. Cards can be installed using only a Phillips screwdriver or nut driver.
Installing an I/O card in the F6