Rear panel, Analog input terminal, Analog output terminal – Yamaha DEQ5 User Manual
Page 14: Aes/ebu digital i/o terminal, Yamaha y2 digital i/o terminal, Word clk input terminal, Time code input terminal
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Rear panel
ANALOG INPUT terminal
Input terminal for analog audio signal. To use the terminal, use the “UTILITY” “SYSTEM SET UP” menu (see
page 23) to make the appropriate settings.
,
ANALOG OUTPUT terminal
Output terminal for analog sound.
AES/EBU DIGITAL I/O terminal
AES/EBU format digital audio signal I/O terminal.
Stereo input and output is possible with only one cable.
In order to receive the digital signal of this format, use the “UTILITY” “SYSTEM SET UP” menu (see page 23)
to make the appropriate settings.
YAMAHA Y2 digital I/O terminal
YAMAHA Y2 format digital audio signal I/O terminal.
Stereo input and output is possible with only one cable.
To receive the digital signal of this format, use the “UTILITY” “SYSTEM SET UP” menu (see page 23) to make
the appropriate settings.
WORD CLK input terminal
The word clock signal received from the external device is input to this terminal.
Inputting the word clock signal from the device set in the clock master to this terminal during the digital audio
signal input enables more stable operation.
To receive the signal input to this terminal, use the “UTILITY” “SYSTEM SET UP” menu (see page 23) to make
the appropriate settings.
, .
TIME CODE input terminal
This is the terminal for time code input. The memory program recall operation can be ^utpni^ted, based on the
time code input to this terminal.
^
. . v i
m
;
j
Use the “UTILITY” “TIMECODE EVENT” menu (see page 35) to make the appropriate settings.