Yamaha DEQ5 - Manual (Page 10)

2]
NOMENCLATURE AND FUNCTIONS
1. Front panel
Power supply section
© Power switch
Power supply switch
EQ control section
@ PARAMETER keys
The display for the EQ settings is divided into several menus. Use this key to change the screen display and to
recall the relevant menu when changing the parameter to be adjusted.
Each time you press the key, the information on the display will change.
Pressing this key while recalling the UTILITY menu, will recall the EQ setting screen.
© DISPLAY key
Press this key while checking the overall frequency characteristics graph to switch to the EQ or filter setting
screen which can be accessed as well by the @ PARAMETER key.
Each time you press the key, the menu shown by the @ PARAMETER key and the content of the display will
change.
Pressing this key while recalling the UTILITY menu will recall the EQ setting screen.
© FLAT key
This key is used to set the value “G” (GAIN) in all band to “0”.
Pressing the key displays “FLAT OK?” in the upper right part of the display. To make the characteristics FLAT,
press this key again while the display is on.
® L and R keys
These keys are used to select channels for EQ adjustment.
If you press one key while holding down the other key, the parameter changed after that becomes the same for
both channels. (Parameter link function)
® HUM FILTER key
Turn on this key (LED lights up) to filter out hum.
Use the PARAMETER key menu, see item @, for the function settings.
4