Dynon Avionics SkyView Pilots Users Guide - Manual (Page 6)

vi SkyView Pilot’s User Guide
Revision Revision Date Description
E October 2010
Added information about User Waypoint power user feature that is fully documented on
wiki web page.
Added information about menu changes that may be present in SLSA and other aircraft
that SkyView is integrated into as an OEM component.
Added transponder operation information and specifications.
Added traffic display information for both MAP and PFD pages.
Added a better description of the combined EGT/CHT gauge.
Added Synthetic Vision licensing information.
Added Navigation Mapping Software Licensing and updated operation information.
G March 2011
Revision F skipped to obtain version parity between Installation Guide and Pilot’s User
Guide.
Added description of GPS Steering control of Autopilot.
Pitch Trim Indicator behavior and performance expectations clarified.
Added servo weights.
Added product registration information.
Described improved loss of external power with backup battery connected behavior.
Added information about G Meter.
Added information about new/improved Navigation Mapping Software purchase,
licensing, and operation.
H May 2011
Added description of enabling/disabling extreme pitch warning indicators and Flight Path
Marker.
Updated screen layout button labeling and figures
Added information on Flight Planning.
Updated several of the figures that were no longer valid due to button and screen
changes.
Changes made for new style of heading bug and heading readout.
Screen Hardware changed to Display Hardware.
Added section on autopilot safety features.
Added additional information about airport graphics.
Added additional information to SV-ADAHRS-20X Instruments and Sensors table.
I September 2011
Added description of improved bug window outlining (when selected) and cyan
highlighting (when being adjusted).
Added “Show VOR Directions As” menu item description.
Added Vertical Power VP-X information.
Clarified SV-BAT-320 charging behavior; Clarified which devices and modules the SV-BAT-
320 is capable of powering.
Added permission to print the manual.
Added map panning information.
Remove erroneous checkmark in AOA column in winds row in “Instruments and Sensors “
table.
Improved HSI information.