Dynon Avionics SkyView Pilots Users Guide - Manual (Page 128)

SV-MAP-270 Navigation Mapping Software
7-38 SkyView Pilot’s User Guide - Revision S
Detailed Facility Information
When an airport is displayed in the Info window after the INFO button is pressed, detailed
information about the selected facility is displayed. Information is arranged into tabs of
organized information. For example, information about airports is divided into APT, FREQ, RWY
(runways), and RMK (remarks) tabs. Move the joystick left and right to select these different
tabs of information at the top of the window.
Some tabs have more information than can fit on the screen at once. In this case, turning the
knob or moving it up/down will scroll or change the information displayed. For example, some
airports have multiple runways listed under the RWY tab. Once the RWY tab is selected,
different runway information can be displayed by turning or moving the CURSR knob up/down.
You may press ADD->FPL from the info window to add the displayed facility as a waypoint to
the Flight Plan.
Figure 111 - Airport Info
Figure 112 - Airport Frequency Info Figure 113 - Frequency Narrative