Dynon Avionics SkyView Pilots Users Guide - Manual (Page 227)

Messages and Alerts
SkyView Pilot’s User Guide - Revision S 12-11
Spoken Alert (if
configured)
Message Displayed
in Message
Window
Notification
Area Alert
(severity)
Description
“Overspeed”
None n/a
Indicated airspeed is exceeding
Vne
“Flaps Overspeed”
None n/a
Indicated airspeed is exceeding
Vfe (and flaps are at least partially
deployed)
“Approaching Waypoint”
None n/a
The aircraft is within 30 seconds
of an upcoming SkyView flight
plan waypoint (except the final
waypoint)
“Check Gear”
None n/a
The aircraft is configured as a
Retractable gear, and the Landing
Gear is UP and the aircraft is
descending through the
configured minimum warning
speed.
“Gear Overspeed”
None n/a
The aircraft is configured as either
a retractable or amphibious gear,
the landing gear is not UP, and the
airspeed is exceeding the
configured maximum gear down
speed.
“Gear is Up for Water
Landing”
None n/a
The aircraft is configured as an
amphibious gear capability of
runway landings, and the gear is
in the UP state and the airspeed is
descending through the
configured minimum warning
speed.
“Gear is Down for Runway
Landing”
None n/a
The aircraft is configured as an
amphibious gear capability of
runway landings, and the gear is
in the DOWN state and the
airspeed is descending through
the configured minimum warning
speed.
Table 11 - Messages, Alerts, and Audio Alert Details
STANDBY NETWORK ERROR Explained
The SkyView Network that connects your ADAHRS(s), EMS module, Autopilot servos, ARINC
module, and display are designed with fully redundant data pathways. When the STANDBY