Stamping originals, Stamping originals -14, See p. 2-14 – Canon IMAGERUNNER 2230 User Manual
Page 86: Stamping originals," on p. 2-14, Place your originals into the feeder
Sending Methods
2-14
2
Basic Send
and Receiv
e Methods
Stamping Originals
The machine can print a stamp (approximately 1/8" (3 mm) in diameter) on the front
side of scanned originals.
IMPORTANT
•
The Stamp mode cannot be used with the Document Size (Other Size) mode.
•
The Stamp mode cannot be used when sending a fax document in the Direct Sending
mode.
NOTE
The Stamp mode can be set only if the optional Feeder (DADF-N1) is attached.
1
Place your originals into the feeder.
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
Position at which
stamp is applied.
Vertical placement
Position at which
stamp is applied.
ABC
Horizontal placement
This manual is related to the following products: