Canon IMAGERUNNER 2230 - Manual (Page 139)

Changing the Zoom Ratio 3-31
3
Speci
a
l F
a
x Fun
c
ti
ons
Zoom by Percentage
You can reduce or enlarge originals by any zoom ratio in 1% increments. Any ratio
from 50% to 200% can be set. The same zoom ratio is used for the horizontal (X)
and vertical (Y) axes.
1
Place your originals.
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
2
Press [Special Features]
➞ [Zoom TX].
If necessary, see the screen shot in step 2 of "Preset Zoom," on p. 3-29.
3
Press [-] or [+] to set the zoom ratio
➞ press [Done] ➞ [Done].
You can also use - (numeric keys) to enter the value, and (Clear) to
clear your entry.
You can change the value by pressing [-] or [+], even if you have entered the
value using
- (numeric keys).
The selected mode is set, the display returns to the Fax Basic Features screen,
and the specified zoom ratio is displayed.
NOTE
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.