Canon IMAGERUNNER 2230 - Manual (Page 266)

Communications Settings 6-10
6
System Mana
ger Settin
gs
4
If you want to set a password for the Memory Lock mode,
enter a password using
- (numeric keys)
➞ press [Next].
If you set a password, it will be necessary to enter the password whenever you
want to change the Memory Lock mode settings, or cancel the Memory Lock
mode.
If you do not want to set a password, press [Next]
➞ proceed to step 5.
You cannot store a password with only zeros as the number, such as <0000000>.
IMPORTANT
Since there is no way to check a stored password, make sure that you write it
down, and keep it in a safe place.
NOTE
If you make a mistake when entering the password, press (Clear) to clear the
entire entry
➞ enter the correct password.