Canon IMAGERUNNER 2230 - Manual (Page 241)

Setting Up Memory Boxes 5-75
5
Customizin
g F
a
x Se
tting
s
7
If you want to set a password for this Relay Memory Box, enter
the password using
- (numeric keys)
➞ press [Next].
If you do not want to set a password, press [Next] proceed to step 8.
You cannot store a password with only zeros as the number, such as <0000000>.
IMPORTANT
Since there is no way to check a stored password, make sure that you write it
down, and keep it in a safe place.
NOTE
• If you make a mistake when entering the password, press (Clear) to clear the
entire entry
➞ enter the correct password.
• If you want to cancel setting up the Relay Memory Box, press [Cancel].