Canon IMAGERUNNER 2230 - Manual (Page 226)

Printing Received Documents 5-60
5
Customizin
g F
a
x Se
tting
s
❑
If you selected [Fix. Red.], press [-] or [+] to specify the reduction ratio.
You can specify the reduction ratio from 75% to 97% in 1% increments.
NOTE
• You can also use - (numeric keys) to enter the value.
• You can change the value by pressing [-] or [+], even if you entered the value using
- (numeric keys).
❑
Select [Ver. Hor.] or [Vertical Only] for
➞
press [OK].
Reduce Direction
The selected mode is set.
[Ver. Hor.]: The image is reduced in both the vertical and horizontal
directions.
[Vertical Only]: The image is reduced in the vertical direction only.