Canon IMAGERUNNER 2230 - Manual (Page 283)

Communications Settings 6-27
6
System Mana
ger Settin
gs
IMPORTANT
You cannot set the same time for both the start time and end time.
NOTE
• You can select [Everyday] for the Forward Start Time, and [Select Days] for the
Forward End Time, and vice versa.
• If you make a mistake when entering the time, press (Clear) to clear your entry
➞ enter another four digit number.
• If the end time is set earlier than the start time, received documents will stop being
forwarded at the specified end time on the following day. For example:
Start time: 22:00, end time: 21:00; The end time refers to 21:00 of the following day.
• If you do not want to specify the end time, press [Cancel].
• The default setting is 'Off'.
• To disable the Forward End Time, press [Forward End Time]
➞ [Off].
8
When all settings are complete, press [OK].
The selected modes are set.
9
Press [Done] repeatedly until the Fax Basic Features screen
appears.