Canon IMAGERUNNER 2230 - Manual (Page 50)

Flow of Sending Operations 1-26
1
Introdu
ctio
n to
F
a
x Function
s
Flow of Sending Operations
This section describes the flow of basic sending operations.
NOTE
• Before using the Fax function, it is useful to read the following topics:
- Main power and control panel power (See Chapter 1, "Before You Start Using This
Machine," in the Reference Guide.)
- Routine maintenance (See Chapter 7, "Routine Maintenance," in the Reference Guide.)
• The maximum number of send jobs that the machine can handle is 64. However, the
actual number of send jobs that the machine can handle may be fewer than 64, if multiple
documents are being sent at the same time.
• You can print a report that contains the results of all send jobs. (See "TX Report," on p.
7-3.)
1
Press the appropriate keys in accordance with the messages
displayed on the touch panel display.
If there are no messages displayed, proceed to step 2.
● If the message appears:
❑
Insert a control card into the optional Card Reader-C1.
The Basic Features screen is displayed.
NOTE
For instructions on using the optional Card Reader-C1, see Chapter 3, "Optional
Equipment," in the Reference Guide.