Canon IMAGERUNNER 2230 - Manual (Page 182)

User Settings 5-16
5
Customizin
g F
a
x Se
tting
s
● If you selected [Resolution/Density/Image Quality]:
❑
Specify the desired settings
➞ press [Done].
NOTE
• For instructions on specifying the resolution, density, and image quality, see
"Resolution, Density, and Image Quality," on p. 2-2.
• For instructions on setting Direct Sending, see "Direct Sending," on p. 2-8.
• For instructions on setting the Stamp mode, see "Stamping Originals," on p. 2-14.
• To cancel setting the standard fax settings, press [Cancel].
5
Press [OK].
The selected mode is set.
6
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Initializing the Standard Settings
You can restore the Standard Settings to their default settings.
1
Press (Additional Functions)
➞ [Custom Fax Settings] ➞
[User Settings].
If necessary, see the screen shots in steps 1 and 2 of "Registering the Standard
Key," on p. 5-4.