Canon IMAGERUNNER 2230 - Manual (Page 112)

Delaying a Send Job 3-4
3
Speci
a
l F
a
x Fun
c
ti
ons
4
Press [OK]
➞ [Done].
The display returns to the Fax Basic Features screen.
5
Specify the destination
➞ press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display
➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The document is stored in memory, and then sent to the specified destination at
the specified time.
NOTE
• For instructions on specifying the destination, see "Dialing Methods," on p. 2-16.
• To cancel a delayed send job, press [Special Features]
➞ [Delayed TX] ➞ [Cancel].
• To cancel all settings and return the machine to the Standard mode, press
(Reset).
• You can also cancel a delayed send job from the System Monitor screen. (See
"Using the System Monitor Screen," on p. 1-43.)