Canon IMAGERUNNER 2230 - Manual (Page 225)

Printing Received Documents 5-59
5
Customizin
g F
a
x Se
tting
s
3
Select [On] or [Off].
IMPORTANT
If you select [Off], the received document is not automatically reduced to fit the size
of the paper. If the size of the received document exceeds the printable area, the
image is divided into equal sections and printed onto separate sheets of paper.
However, if the size of the received document exceeds the recording paper slightly
(1/2" (12 mm) or less), the part of the image that does not fit on the paper is not
printed.
● If you select [On]:
❑
Select [Auto] or [Fix. Red.] for .
RX Reduction
[Auto]: The image is automatically reduced by a suitable reduction ratio
that can range from the value set for , up to 100% of
the received document size.
[Fix. Red.]: The image is reduced by the reduction ratio set in .