Canon IMAGERUNNER 2230 - Manual (Page 344)

Glossary 9-20
9
App
end
ix
SMTP
Simple Mail Transfer Protocol. A TCP/IP protocol for sending messages from one
computer to another on a network.
Stamp
Applies a stamp (about 1/8" (3 mm) in diameter) on the front side of originals after
they have been scanned, so that you can distinguish already scanned originals from
others.
Standard
Use this setting to send normal, typewritten, or printed documents containing only
text and no drawings, photographs, or illustrations. See Fine, Super Fine, and Ultra
Fine.
Subaddress
Subaddress is the global telecommunications standard specified by the ITU-T
(International Telecommunication Union-Telecommunication Standardization Sector).
When the remote party's machine supports the same standard, confidential or
relayed communications are possible by attaching a subaddress and a password in
advance.
Super Fine
A resolution mode for sending originals at four times the detail of the Standard
resolution mode. If the receiving machine does not support this mode, the document
is automatically sent in the Fine mode.
Super G3
Super G3 is a phrase used to describe the generation of fax machines that use ITU-T
V.34 standard 33.6 Kbps modems. Super G3 high-speed fax machines allow a
transmission time of approximately three seconds per page, which results in reduced
telephone line charges.
T
Telephone Line Type
Depending on the type of telephone line that you have, set the machine to touch tone
(T) or pulse (P) dialing.
Tone
Some data services may require that you use tone dialing. If you have a pulse dial
telephone, press [Tone] to switch temporarily from pulse to tone dialing when
connecting to these data services.