Canon IMAGERUNNER 2230 - Manual (Page 245)

Setting Up Memory Boxes 5-79
5
Customizin
g F
a
x Se
tting
s
11
Select each relay setting.
● If you want to restrict the relay source machine from sending you a
transmission request:
❑
Press [On] for .
❑
Specify the destination
➞ press [OK].
If you do not want to set a restriction, press [Off].
You can also specify the relay destination using - (numeric keys).
If the desired destination is not displayed, press [
▼] or [▲] to scroll to the
desired destination.
NOTE
• For instructions on specifying a destination, see "Dialing Methods," on p. 2-16.
• To erase a specified destination, select the desired destination from the list
➞ press
[Erase].