Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 88)

82 Localize Station settings Welch Allyn
Configure auto discharge settings
The Welch Allyn ADT Task Scheduler Service provides a configurable service that runs
automatically in the background to assist in managing the Patient List contents and
remove old entries.
1. From a Central Station, navigate to Settings > Advanced settings (if required) >
Admin tools > Settings menu, click on Sever.
2. From Connex Server, launch the Admin Tools launcher > Admin tools tab >
Settings menu, click on Sever.
3. The server available settings window appears. An example is shown in “Figure 12-11:
Automatic discharge settings controls available in Server settings window” below.
4. Select Edit to make changes.
Figure 12-11: Automatic discharge settings controls available in Server settings window
Note The automatic discharge feature is only applied to patients that are not currently
being monitored on Connex CS