Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 126)

120 Configure NRS Welch Allyn
Adding an ordinal for Service Monitor
The Welch Allyn Service Monitor provides functionality to monitor the health of systems
and devices on the network and provide data available to the customer via web page. TO
support devices sharing data with the Service Monitor service, an entry is require in the
NRS settings.
In the Services to be resolved by DCP Network Rendezvous window:
1. Use the drop down menu to change the Ordinal to 10.
2. Click in the Host field, and enter the IP address of the Connex CS Server.
a. For a stand-alone central station, enter the IP address assigned to the workstation
CPU.
b. For a networked central station, enter the IP address assigned to the Connex
server.
Refer to the Connex CS Customer Project Req Form, Appendix B1 as needed
for IP address information.
3. Click Add.
4. Click Save when all changes are complete.
5. An example is shown in “Figure 18-3: NRS settings with ordinal 10 added for Service
Monitor” on page 121 below.
Note