Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 80)

74 Localize Station settings Welch Allyn
Figure 12-1: Vital Signs General Parameters configuration window example
Patient Management settings
Two main functions are controlled in this area including:
• Duration of discharge patients appearing in the patient list.
• Patient tags enabled and customer descriptions.
To change how long a discharged patient stays in the Patient List:
1. From the Settings > Advanced settings (if required) > Admin tools > Settings
menu, click on Stations. The Station Settings window appears.
2. Select Patient management.
3. Select the General setting to control how hone a discharged patient is retained in the
patient list. The default value is 24 hours, and can be changed using the drop down
menu choices. An example is shown in
“Figure 12-2: General Patient management
configuration window example” on page 75.