Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 87)

Connex CS Admin Guide Localize Station settings 81
Figure 12-10: Units of measure window.
6. Use the drop down to select available units of measure for specific parameters.
7. Make changes as needed, and click on Save when complete.
The Central Station controls the units of measure for connected devices,
including CVSM, upon startup and connection to the Central Station. Thus
devices inherit the same units of measure as the Central Station.
If changes are made to the Units of Measure at the Central Station while devices
are connected, those devices received the updated setting upon reconnecting to
the station. To affect an immediate change at the device, power cycle the device
and reconnect to the Central Station.
8. Reboot all Central Stations and all connected devices to ensure that all components
are operating with the same values for units of measure.
Note