Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 133)

Connex CS Admin Guide Troubleshooting 127
Hardware Connex Server Computer Front Panel LED
information
The server included LEDs on the front panel that can aid in troubleshooting the system.
I/O errors 2E0h ERR_IO_ADDRESS
2E1h ERR_IO_COM
2E2h ERR_IO_LPT
2E3h ERR_IO_CONFLICT
2E4h ERR_IO_UNSUPPORTED
2E5h ERR_IO_IRQ
2E6h ERR_IO_IDE
2E7h ERR_IO_FDD
2F0h ERR_IO_CPUID
2F1h ERR_IO_BIST
2F2h ERR_IO_BSP
2F3h ERR_IO_AP
2F4h ERR_IO_CMOS
2F5h ERR_IO_DMA
2F6h ERR_IO_NMI
2F7h ERR_IO_FAILSAFE
Class Number Name
LED Name Function LED Color Notes
ID Aid in server identification
from the back panel. Blue Press ID LED button or use Server
Management SW to turn the LED on and
off.
System Fault Visible fault warming Green or
Amber On = No Fault
Green Blink = degraded
Amber = non-critical
Disk Activity Display disk activity Green Up to 4 disk activity LEDs, one per bay.
Blinking = activity, no action required.
Off = no activity or disk not installed.
Power LED Identify the power state of the
system Green Off = power is off
On = power is on
Slow blink = low power state