Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 58)

52 Location Management Welch Allyn
To Add a Range of Rooms and Beds
1. In the Master bed list window, click Edit to make changes.
2. Click on the expander to the left of Advanced options. Two additional windows
appear. An example is shown in Figure 5-10.
Figure 8-9: Advanced options default
3. Click in the Room Start field to enter the first room number of a range.
4. Click in the Room End field to enter the last room number of a range.
5. Click in the Bed Start field to enter the first bed name of the range.
6. Click in the Bed End field to enter the last bed name of the range. An example is
shown in Figure 5-11.
Figure 8-10: Advanced options default
7. Click Add range when finished. The new range of beds and rooms appears in the list.
Ranges of beds and rooms must be continuous. The Add range function may be
used as many times as needed. Single rooms and beds may be specified by using
the same start and end value (i.e. Room 318 - 318).
8. Click Save when finished.
Note