Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 62)

56 Location Management Welch Allyn
Add a Covered area
The Covered area window contains configuration tools that bind all of the previously
entered location information together with a station. The process described in this section
includes:
• Add a new covered area
• Assign default location
• Assign bed to the covered area
• Assign a station to the covered area.
The binding of a covered area and specific bed locations to a specific station name
together completes the configuration of location management settings prior to deploying
to a host.
To get started:
1. From the Settings > Advanced settings (if required)> Admin tools > Stations >
Location management menu, click on Covered Areas. The Covered areas window
appears. An example is show below in
“Figure 8-13: Master bed list default window
example” .
Caution Any time changes are made to the Master Bed List, Covered Area, or
Licensing, the affected Central Station should be restarted prior to clinical usage.