Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 124)

118 Configure NRS Welch Allyn
Figure 18-1: Network Rendezvous Services window example
2. Observe that there are three sub-windows within the Network Rendezvous Services
window.
3. Click on Edit near the bottom of the window.
Change Server Ports
1. In the Server window, click on the radio button next to the specific port numbers ore
DCP Listener Port, and NRS Listener Port.
2. Make port number changes as needed.
Refer to the Connex CS Customer Project Req. Form for port number
information as needed. In general, these port numbers will never need to change.
These port numbers should only be changed if:
• Connex VM and Connex CS are both running on the same network.
• Multiple stand-alone central stations are running on the same network.
Assign Host for DCP
1. In the Services to be resolved by DCP window, click in the Host field.
Note