Welch Allyn Connectivity Server - User Manual - Manual (Page 72)

68 Log out of the WACS program or reboot WACS Welch Allyn Connectivity Server
Reboot WACS
The WACS system must be rebooted after a server upgrade, for the upgrade to take
effect. Designated WACS biomedical engineers can perform WACS reboots. Only one
WACS reboot can be scheduled for one time.
To reboot WACS
1. Log in to the WACS program. For instructions, see “Log in to the WACS program” on
page 12.
The Home Page appears. If WACS Administrator is not available, you have not been
assigned WACS administrator privileges.
2. Click WACS Administrator.
The Overview page appears.
3. Click the Reboot Manager tab.
The Reboot Manager page appears.
4. Click one of the choices, and then click the adjacent pull-down menu and select an
interval or time.
5. Click Schedule a Reboot.
The Reboot Schedule Confirmation page appears.