Canon EOS-1D Mark IV - Manual (Page 80)

B! White Balance Correction
White Balance Auto Bracketing
With just one shot, three images having a different coior baiance can be
recorded simuitaneousiy. Based on the coior temperature of the current white
baiance setting, the image wiii be bracketed with a biue/amber bias or
magenta/green bias. This is caiied white baiance bracketing (WB-BKT). White
baiance bracketing is possibie up to ±3 ievels in singie-ievei increments.
Set the white balance bracketing amount.
• in step 2 for white baiance correction, when
you turn the <0> diai, the mark on the
screen wiii change to “■ ■ ■” (3 points).
Turning the dial to the right sets the B/
A bracketing, and turning it to the left
sets the M/G bracketing.
On the right side of the screen, "BKT”
indicates the bracketing direction and
the bracketing amount.
» Pressing the < IN FO. > button will cancel
all the [WB SHIFT/BKT] settings.
® Press <©> to exit the setting and
return to the menu.
Bracketing Sequence
The images will be bracketed in the following sequence: 1. Standard
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard
white balance, 2. Magenta (M) bias, 3. Green (G) bias.
0 « During WB bracketing, the maximum burst for continuous shooting will be
lower and the number of possible shots will also deaease to one-third the
normal number. Also, the white balance icon will blink on the rear LCD panel,
• You can also set white balance correction and AEB together with white
balance bracketing. If you set AEB in combination with white balance
bracketing, a total of nine images will be recorded for a single shot.
• Since three images are recorded for one shot, the card will take longer to
record the shot.
• "BKT“ stands for Bracketing.
80