C.fn (v-11 start movie shooting, C.fn iv -12 focusing screen – Canon EOS-1D Mark IV User Manual
Page 232
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Custom Function Settings
C.Fn (V-11 Start movie shooting
0; Default (from LV)
1: Quick start (
If the [♦•
Live View/Movie func. set.]
menu option has been set to
enable movie shooting (p.142), press the
a movie immediately while the camera is ready to shoot.
C.Fn IV -12 Focusing Screen
if you change the focusing screen, change this setting to match the
focusing screen type. This is to obtain the correct exposure.
0; EEc-C IV
Standard focusing screen (Laser-matte).
1: EEc-A, B, C,CII, cm, D, H, I, L
For Laser-matte screens,
2: ®Ec-S
For Super Precision Matte screens.
3: IHEc-N, R
For New Laser-matte screens.
About Super Precision Matte Ec-S and Maximum Lens Aperture
• This focusing screen is optimized for f/1.8 to f/2,8 lenses.
• If the lens maximum aperture is brighter than f/1,8, the center spot
metering circle and Area AF frame might become difficult to see.
« Also, if the lens maximum aperture is slower than f/2.8, the viewfinder
will look darker.
E2 • Since the Ec-A, Ec-B, Ec-I, and Ec-L focusing screens have a prism at
the center, correct exposures cannot be obtained with evaluative
metering and center spot metering. Use either center-weighted average
metering or AF point-linked spot metering (except the center AF point).
• To change the focusing screen, refer to the instructions that come with
the focusing screen.
232