Set the power-off time/auto power off, Select [auto power off, Set the desired time – Canon EOS-1D Mark IV User Manual

Page 52: Silencing the beeper, 1 select [beep, 2 select [off, Him card reminder, 1 select [release shutter without card, 2 select [disable

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Before You Start

Set the Power-off Time/Auto Power Off

To save battery power, the camera turns off automatically after a certain
time of non-operation. You can change this auto power-off time. If you

do not want the camera to turn off automatically, set this to [Off]. After

the power turns off, you can turn on the camera again by pressing the

shutter button or other button.

Select [Auto power off]-

* Under the [V] tab, select [Auto

power off], then press <©>.

Set the desired time.

m Turn the <0> dial to select the

setting, then press <@>.

Q Even if

[Off]

has been set, the LCD monitor will turn off automatically after

30 min. to save power. (The camera’s power does not turn off.)

Silencing the Beeper

Prevents the beeper from sounding when focus is achieved.

Select [Beep].

• Under the [O'] tab, select [Beep], then press <@>.

2 Select [Off].

• Turn the

HIM Card Reminder

This prevents shooting if there is no card in the camera.

Select [Release shutter without card].

• Under the [O'] tab, select [Release shutter without card], then

press <©>.

Select [Disable].