Setting the flash, Setting flash functions, 4 select [external speedlite control – Canon EOS-1D Mark IV User Manual

Page 121: Select [flash function settings, Set the flash function settings, External speedlite control, Flash function settings

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting the Flash

When an EX-series Speedlite (such as the 580EX II, 430EX II, and
270EX) settable by the camera Is attached, you can use the camera’s

menu screen to set the Speedllte's flash function settings and Custom

Functions, First attach the Speedlite to the camera and turn on the

Speedlite.

Setting Flash Functions

4 Select [External Speedlite

control].

• Under the

[Q']

tab, select

[External

Speedlite control],

then press

Select [Flash function settings],

• Turn the <0> dial to select

[Flash

function settings],

then press <©>.

JPtCquabty

linage siicp

ftevlw tiiw

is«
Or

sltuitEt wlitioul ord

Ovn Delelt Dan

£xtprnai control

ExtSfUl Swcfflltv CQTtrd

I FUsh function sentry

fl«h CPnsettmjs
Clear alf Speedlite C.Fn's

Set the flash function settings.

• Turn the <0> dial to select a flash

function and set it as desired.

• The procedure is the same as setting

a menu function.

Q • If you press the button in step 3, you can revert the settings to

the default.

• With an EX-series Speedlite not settable with the camera, only

[Flash

exp. comp], [E-TTLII],

and

[Flash firing]

are settable under

[Flash

function settings],

(Certain EX-series Speedlites also enable

[Shutter sync.]

to be set.)

121