Setting the image-recording quality, Selecting the image size, Using the rear lcd panel to set the image size – Canon EOS-1D Mark IV User Manual
Page 59: Select the image size
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Image-recording Quality
You can set the image size (recorded pixels), image type (JPEG or
RAW), and JPEG quality (compression rate).
Selecting the Image Size
L/M1/M2/S will record the image as a JPEG image. In the Q
S B mode, the image will require processing with the software
provided.
You can set the image size in one of the two ways below.
Using the Rear LCD Panel to Set the Image Size
jr-^ Press the
Press the
twice to display the card and image
size on the rear LCD panel.
Image size/Card WB
Select the image size.
• Turn the
<0>
dial to select the
* •
image size.
• If B/MB/SB and L/M1/M2/S are
displayed at the same time, the RAW
and JPEG image will be recorded
simultaneously on the card.
• Turn the <£S> dial to select the card
to record or playback images (p.56).
When
[Record fune.]
is setto
[Ree. separately]
(p.57), turn the <^> dial
to select the card and set the Image size for the respective card.
59