Register image on card, 1 select [custom wb regist, Select the custom wb no. to be registered – Canon EOS-1D Mark IV User Manual

Page 75: Select [register image on card, Select [ok

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

I Custom White Balance

Register image on card

First follow step 4 under “Capture and register the image”

(p.73,

74)

to take a picture of a plain, white object. This image saved in

the card can then be registered for Custom WB.

The procedure up

to step 2 is the same as with "Capture and register the image”.

<1 Select [Custom WB regist.].

^ Select the Custom WB No. to be

registered.

Select [Register image on card].

• Turn the <0> diai to seiect

[Register

image on card],

then press <@>.

► The images saved in the card wili be

displayed.

Select the image to be used for

registrating the Custom WB data.

• You can also display a four- or nine-image

index by pressing the <<9. > button

• Turn the

<0>

dial to select the

image to be registered for the Custom

WB data, then press <@>.

Select [OK].

• Turn the <0> dial to select

[OK],

• To use the Custom WB, see “Selecting and

Shooting with the Custom WB data" (p.76),

y If the image was captured while the Picture Style was set to

[Monochrome]

(p 67), it cannot be selected in step 4.

Use W0 SW from ttsj im»ae

tor Cistom WBi

Ur«xi 0*