Set the date and file number imprinting, Set the number of copies, Start printing – Canon EOS-1D Mark IV User Manual
Page 195
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Printing
Trimrnkig
Paper set№9£
H
llDefPuil
Cancel
^5onjered
■
Set the date and file number
imprinting.
• Set as necessary.
• Turn the dial to select ,
then press <@>.
• Turn the <0> dial to select the
desired setting, then press <@>.
Set the number of copies.
• Set as necessary.
Turn the dial to select ,
then press <©>.
Turn the <0^ dial to select the
number of copies, then press <@>
Start printing.
• Turn the <0> dial to select [Print],
then press <©>.
► The printing will start.
SOn
___
1 copies
TrlfflfflJng
Paper setiings
ij Default
Caicel
i|lEk)defsi
Q • For details on trimming, see page 197.
• The [Default] setting for printing effects and other options are the
printer's own defauit settings as set by the printer's manufacturer. See
the printer's instruction manuai to find out what the [Default] settings are.
• When imprinting the shooting infonnation B (p.193) for images shot at
H2, H3 iSO speeds during iSO speed range expansion, the iSO speed
setting may not be correctly printed.
• Depending on the image's file size and image size, it may take some
time for the printing to start after you select [Print].
• If image tilt correction (p.197) has been applied, it may take longer to
print the image.
• To stop the printing, press <0> while [Stop] is displayed, then select [OK].
• If you execute the [(= Clear all camera settings] menu option (p.53), all
the settings will revert to the default.
195