O making selections with the quick control dial, After pressing a button, turn the <0> dial, Turn the <0> dial only – Canon EOS-1D Mark IV User Manual
Page 43: Vertical shooting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operation
O Making Selections with the Quick Control Dial
Before using the
<
0
> dial, set the power switch to < J>.
After pressing a button, turn the
<0> dial.
When you press a button, its function remains
selected for 6 seconds (2)6). During this
time, you can turn the <0> dial to set the
desired setting When the function selection
turns off or if you press the shutter button
halfway, the camera will be ready to shoot,
• Use the dial to select or set the shooting mode,
drive mode, flash exposure compensation, AF
point, ISO speed. Picture Style, exposure
compensation when the
pressed. Image size, white balance, etc
Turn the
<
0
>
dial only.
While looking at the viewfinder or top LCD panel,
turn the <0^ dial to set the desired setting.
• Use this dial to set the exposure
compensation amount, aperture setting for
manual exposures, selecting an AF point, etc
You can do step (1) even when the power switch is set to
Vertical Shooting
The camera bottom has vertical-grip buttons and a dial (p.16, 17)
Before using the vertical grip's buttons and dial,
set the vertical-grip ON/OFF switch to
When not using the vertical shooting
controls, set the switch to
prevent accidental operation.
43