Cfn iii '9 multi-controller while metering, C.fn 111 >10 selectable af point – Canon EOS-1D Mark IV User Manual

Page 223

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

laiajm Custom Function Settings

CFn III '9 Multi-controller while metering

0: Off

1: AF point selection

During viewfinder shooting while the metering is active, you can select

the AF point directly with <-X-> instead of pressing the button first.

C.Fn 111 >10 Selectable AF point

You can change the number of manually-selectable AF points. During

automatic AF point selection, all 45 AF points will be selectable regardless

of the setting below.

0: 45 points

1: 19 points

Sets the same manually-selectable 19 points as with the EOS-1 D Mark

2: 11 points

Sets 11 manually-selectable AF points.

3: Inner 9 points

Sets 9 manually-selectable inner AF points.

4: Outer 9 points

Sets 9 manually-selectable outer AF points.

The AF point selection sequence is shown below:

223